PS3: ROGERO CFW 4.46.1+ Multiman 4.46.1 Stealth PSN +PS3ita manager, хакване на Плейстейшън 3   Leave a comment

Link  с необходимите програми и видео как се инсталира CFW 4.46.1 + Multiman 4.46.1 stealth

Към края на месец август 2013г все още има начин да се играе онлайн на хакнат PS3.  Първия вариант е да  ползвате PKG игри без Multiman, a втория да ползвате Stealth Multiman .  Oт линка изтеглете текстови инструкции  + видео описание как става инсталирането.

cfw 4.46.1  rogero 4.46.1

Инсталирането на системен софтуер става лесно и е описано подробно на страницата на SONY.  Имате нужда от USB флашка,  в която слагате  файл със системния ъпдейт . Празна USB флашка, създавате папка UPDATE и вътре слагате системния ъпдейт, който е  един файл и се казва PS3UPDAT.PUP.

Ето английските инструкции:

Step 1: Manually Download System Software

  1. You will need a USB Mass Storage device such as a USB flash drive with at least 168 MB of free space. If your PS3 is either CECHA00/CECHB00 series model, you can also use Memory Stick™, SD Memory Card, and CompactFlash®.
  2. Create a folder named “PS3” on the storage media or USB device.
  3. Within the PS3 folder, create a folder named „UPDATE“.
  4. Using your computer, click the following hyperlink
  5. Download the update data from the webpage and save it in the „UPDATE“ folder.
    • Location: Save in the “PS3” folder > “UPDATE” folder
    • File name: Save as file name “PS3UPDAT.PUP”

Note: If the data is not saved in the correct way, the PS3 will not recognize the update data. The folder name must be in all uppercase letters.


Step 2: Activate Safe Mode

  1. With the PS3 off (power light should be red), touch and hold the Power button, you will hear the 1st beep indicating that the PS3 is powering on.
  2. Continue to hold the power button, and after approximately 5 seconds you will hear a 2nd beep.
  3. Continue to hold the power button and after 5 more seconds you’ll hear a 3rd beep, and system will power off (Power light goes red).
  4. Release power button.
  5. Touch and hold the Power button, you will hear the 1st beep, again for PS3 power on.
  6. Continue to hold and after approximately 5 seconds you will hear the 2nd beep for video reset.
  7. Continue to hold and after 5 seconds you will hear a quick double beep.  At that point release power button.
  8. If you succeeded in activating Safe Mode, you will see a message on screen saying, „Connect the controller using a USB cable and then press the PS button“.
  9. Connect a controller to the PS3 with a USB cable.

If you were not able to get into Safe Mode, your system may need service.


Step 3: Manually Update PS3 Software

 

  1. Connect the storage media to PS3 system.
  2. Select [6 – System Update] and Press X.
    • Please note: Data and settings may be deleted if you choose any of the first (5) options. Please make sure to only choose option [6 – System Update].
  3. Press Start and Select at the same time.
  4. The PS3 system will restart and recognizes the update file in the storage media.
  5. Press right on the d-pad to scroll through the update description and user agreement.
  6. Press X to confirm the update.
  7. The system will now install the new system software and restart automatically upon completion.

За хакване, ремонт, ънбрик, отбанване, Downgrade 4.46 OFW, Upgrade 4.46 CFW , Sony Playstation 3  tel 0892721043 / 0876-105525 инж. Валентин Георгиев, скайп Gamechipbg

Posted август 23, 2013 by gamechipbg in SONY PLAYSTATION 3

Вашият коментар

Попълнете полетата по-долу или кликнете върху икона, за да влезете:

WordPress.com лого

You are commenting using your WordPress.com account. Log Out / Промяна )

Twitter picture

You are commenting using your Twitter account. Log Out / Промяна )

Facebook photo

You are commenting using your Facebook account. Log Out / Промяна )

Google+ photo

You are commenting using your Google+ account. Log Out / Промяна )

Connecting to %s

%d bloggers like this: